Organising raw camera trap images in camtrapR

Juergen Niedballa (



camtrapR provides functions for organising and managing camera trap images and for the preparation of occupancy and (spatial) capture-recapture analyses. Currently the package handles JPG images only. Because of inconsistent metadata structure, there is no support for video files yet.

The vignettes demonstrate the camtrapR workflow using the sample data set that is included in the package. Sample data were generated in a camera trapping survey in Sabah, Malaysian Borneo (A. Mohamed et al. J. Mammal., 94, 82-89; 2013).



The workflow in camptrapR is made up of a number of function that build upon one another in a logical sequence. Here is a list of function grouped by work steps in the order in which they should be run. Details on all functions are provided below, in the other vignettes and the function help files.

  1. createStationFolders
  2. timeShiftImages (only if necessary)
  3. imageRename
  4. addCopyrightTag
  1. checkSpeciesNames
  2. createSpeciesFolders
  3. checkSpeciesIdentification
  4. appendSpeciesNames
  5. exifTagNames
  6. recordTable
  1. detectionMaps
  2. activityHistogram
  3. activityDensity
  4. activityRadial
  5. activityOverlap
  6. surveyReport
  1. getSpeciesImages
  2. recordTableIndividual
  1. cameraOperation
  2. detectionHistory (for occupancy analyses)
  3. spatialDetectionHistory (for spatial capture-recapture analyses)

General sampling situation

camtrapR was designed for camera trapping surveys in which an array of camera trap stations (each consisting of one or more camera traps per station) is operated in a study area. The vignettes will provide a guideline for how to use camtrapR in different sampling situations.


To facilitate understanding here is a glossary on how we use specific terms. It is standard camera trapping nomenclature.


camtrapR relies on the free and open-source software ExifTool written by Phil Harvey to extract metadata from images. ExifTool is freely available here and runs on Windows, Linux and MacOS. In order to use it, your system must be able to find the software. On MacOS, Linux and Unix it needs installation and should afterwards be found by the system without problems. How to set up Exiftool for Windows is detailed below. General installation instruction can be found here.

ExifTool for Windows

On Windows, ExifTool does not need installation. In order for Windows to be able to find ExifTool, follow the instructions found here. Be sure to download the stand-alone executable. The download file is a .zip which you need to unzip, rename the contained .exe file to exiftool.exe and place it in, e.g., C:/Windows. Windows will be able to find ExifTool if exiftool.exe is placed in a directory that is contained in Window’s PATH variable (e.g. C:/Windows).

# Check which directories are in PATH (not shown here)
# Check if the system can find ExifTool
##                    exiftool 
## "C:\\windows\\exiftool.exe"

If exiftool.exe cannot be placed in a PATH directory (e.g. due to limited user privileges), users can place exiftool.exe in any directory and then add that directory to PATH temporarily for use in the running R session using the function exiftoolPath. This is necessary if the directory containing exiftool.exe is not in PATH by default.

# this is a dummy example assuming the directory structure: C:/Path/To/Exiftool/exiftool.exe
exiftool_dir <- "C:/Path/To/Exiftool"        
exiftoolPath(exiftoolDir = exiftool_dir)

Afterwards, Windows (via R) should be able to find ExifTool during the active session.

ExifTool performance

ExifTool is the performance bottleneck of the package functions. It can extract metadata at a rate of about 160 images per second (approx. 10,000 images per minute, measured on a laptop computer running Windows 7, Intel Core i5-2410M / 2.3 GHz, 6 GB RAM). Performance tends to be lower when ExifTool is first called and increases afterwards; and it decreases in situations with numerous camera trap stations with few images each (because ExifTool is called separately on every station directory).

In a future release, we plan to offer support for the metadata extraction library Exiv2. Preliminary test showed that performance increased 2-3 fold.

Camera trap station information

Before looking at how images are handled, let’s first familiarise ourselves with how information about camera trap stations are stored. Camera trap station information are tabulated in a simple data frame with 1 row per station (if there was 1 camera per station) or 1 row per camera (if there was more than 1 camera per station). Information to be stored in this table are: station (and camera) IDs, geographic coordinates, setup and retrieval dates and possible dates when camera were not operational (because of malfunction, animal interference, empty batteries, full memory cards etc.). The table can be generated standard spreadsheet software and loaded into R.

# here is a sample camera trap station table
##    Station  utm_y  utm_x Setup_date Retrieval_date Problem1_from
## 1 StationA 604000 526000 02/04/2009     14/05/2009              
## 2 StationB 606000 523000 03/04/2009     16/05/2009              
## 3 StationC 607050 525000 04/04/2009     17/05/2009    12/05/2009
##   Problem1_to
## 1            
## 2            
## 3  17/05/2009

Note that the sample data contain only one camera per station. Thus, there is no need to differentiate between station and camera IDs. If there was more than one camera per station, an additional column for camera IDs would be needed. Consequently, there would be one row for each camera and thus several rows per station.

Station / Camera IDs

Station and camera IDs can be any combination of characters and numbers. Please don’t use underscores though, and more specifically, don’t use double underscores (“__“), as these are used in a number of functions to separate bits of information (e.g. in file names created by imageRename or row names in cameraOperation).

Column names

Column names are not prescribed to allow users freedom in naming their data the way they wish (with one exception detailed below). In the sample table, ‘Station’ contains station IDs, ‘utm_y’ and ‘utm_x’ contain the station’s geographic coordinates. ‘Setup_date’ and ‘Retrieval_date’ are the dates the stations were set up and retrieved from the field. All of these may have user-defined names. ‘Problem1_from’ and ‘Problem1_to’ are optional columns to specify periods in which cameras/stations were not operational. Additional pairs of columns such as ‘Problem2_from’ and ‘Problem2_to’ etc. can be added if cameras/stations malfunctioned repeatedly. Their names must follow the pattern given here.

Date format

All dates in this table (setup, retrieval and problem columns) should be of data type “character” and can be formatted in any way that function as.Date can interpret. camtrapR by default assumes the standard format “YYYY-MM-DD”, e.g. “2015-12-31”, and we recommend to use that format (it is also best for sorting by date). In any case, date format must be consistent between the date columns.

Two functions (cameraOperation, surveyReport) utilize these date information and therefore contain arguments to specify the date format (dateFormat and CTDateFormat, respectively). Internally, these arguments are passed to function as.Date as argument format and are needed to interpret the character string (e.g. “2015-12-31”) provided in the table as a date. Details on how to set it correctly can be found in the Details section of the help files of functions as.Date and strptime or here.

Here are a few examples for December 1st 2015 (“generic” is the abstract representation of your date string (Y = year, M = month, D = day), “example” is a formatted example and “dateFormat argument” is what you’d specify in dateFormat and CTDateFormat):

generic example dateFormat argument
"YYYY-MM-DD" "2015-12-01" "%Y-%m-%d"
"YYYY/MM/DD" "2015/12/01" "%Y/%m/%d"
"YYYY/MM/DD" "2015/12/1" "%Y/%m/%d"
"MM/DD/YY" "12/01/15" "%m/%d/%y"
"YYYYMMDD" "20151201" "%Y%m%d"
"DD.MM.YY" "1.12.15" "%d.%m.%y"
"DD-MMM-YY" "01-Dec-15" "%d-%b-%y"

 In the sample table (camtraps), we use another date format for demonstration purposes.

Data type of the ID and date columns in the table must be character or factor. Please don’t use data type Date. You can turn data type Date into character using as.character.

Station-/ Camera-level covariates

If needed, station-/camera-level covariates can be specified in this table, e.g. trail or habitat type, camera model etc. They can later be used as covariates, e.g. in occupancy models.

Organising raw camera trap images

After collecting images from camera traps, the images are saved into a directory structure like this:



If there was more than 1 camera per station, the station directories must contain camera subdirectories, e.g.



If you have more than 1 camera per station but don’t separate the images from different cameras at this stage, you will not be able to do so at a later point. Later in the workflow, you can decide whether you would like to keep them separate or merge them (in the function imageRename).

Generally, you should not work on your raw data and instead keep them as a backup. If you rename you images with imageRename, whole camtrapR workflow will take place in a copy of the images to prevent data loss.

Another important point is not to save any other data besides images in image directories. It may interfere with the operation of the package and ExifTool.

Saving raw images on your hard disk

The directories for the raw images can be created automatically using the function createStationFolders and the camera trap station table. As mentioned above, images can either be stored in station directories (if there was 1 camera per station) or in station/camera directories (if there was >1 camera per station). The behaviour is controlled by the function argument cameras. It specifies the camera ID column in the camera trap information table. if it is defined, camera subdirectories will be created within the station directories.

Here is an example in which station directories without camera subdirectories are created.

# create a temporary dummy directory for tests
# (normally, you'd set up an empty directory in a proper place, e.g. .../myStudy/rawImages)
wd_createStationDir <- file.path(tempdir(), "createStationFoldersTest")

# create station directories in  wd_createStationDir
StationFolderCreate1 <- createStationFolders (inDir       = wd_createStationDir,
                                              stations    = as.character(camtraps$Station), 
                                              createinDir = TRUE)
## created 3 directories
##    station
## 1 StationA
## 2 StationB
## 3 StationC
##                                                                                 directory
## 1 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/createStationFoldersTest/StationA
## 2 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/createStationFoldersTest/StationB
## 3 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/createStationFoldersTest/StationC
##   created exists
## 1    TRUE   TRUE
## 2    TRUE   TRUE
## 3    TRUE   TRUE

IMPORTANT: Please note that in this vignette station directories are set up in a temporary directory. That does not make any sense in real life and is done here solely to demonstrate how the functions works. So please don’t do this at home! Instead, always work in permanent directories!

Once the directories are created, you can copy over your images from the memory cards.

Shifting date and time of images

There are situations in which the date and time of your images may be incorrect. Imagine you forgot to set the system time in one of your cameras or reset the time accidentally. Or think of a bug in the camera software that causes years to be wrong as happened in the cameras of a major manufacturer at the turn of the year 2015/2016. Another situation in which images times may need a little shift is when users wish to synchronise the record times between camera pairs.

In any case, systematic offsets of date and time recorded by cameras can be corrected easily. The function timeShiftImages does just that by utilising the date/time shift module of ExifTool. All you need is a table containing the time offset in a certain format, i.e.

##    Station camera    timeshift sign
## 1 StationA     NA  1:0:0 0:0:0    -
## 2 StationB     NA 0:0:0 12:0:0    +

There is a station column with station IDs, camera is NA because there was 1 camera per station only in our example, timeshift is the amount by which to shift the time of all images at that station, and sign specifies the direction in which to shift time. Setting sign to + sets image time ahead by the amount specified in timeshift, - sets image times back. timeshift format is “year:month:day hour:minute:second”, i.e. "1:0:0 0:0:0" is a shift of exactly 1 year and "0:0:0 12:10:01" 12 hours and 10 minutes and 1 second. In the above table, time stampes of images taken at StationA are shifted back by 1 year, and images taken at StationB are shifted ahead by 12 hours.

The function timeShiftImages should be run directly after saving the raw images on the hard disk.

# copy sample images to another location (so we don't mess around in the package directory)
wd_images_raw <- system.file("pictures/raw_images", package = "camtrapR")
file.copy(from = wd_images_raw, to = tempdir() , recursive = TRUE)
## [1] TRUE
wd_images_raw_copy <- file.path(tempdir(), "raw_images")

timeshift_run <- timeShiftImages(inDir                = wd_images_raw_copy,
                                 timeShiftTable       = timeShiftTable,
                                 stationCol           = "Station",
                                 hasCameraFolders     = FALSE,
                                 timeShiftColumn      = "timeshift",
                                 timeShiftSignColumn  = "sign"
## C:\Users\JRGENN~1\AppData\Local\Temp\RtmpOMmRCx/raw_images/StationA
## C:\Users\JRGENN~1\AppData\Local\Temp\RtmpOMmRCx/raw_images/StationB
##                                                                   directory
## 1 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images/StationA
## 2 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images/StationB
##               n_directories                  n_images
## 1     1 directories scanned     3 image files updated
## 2     1 directories scanned     3 image files updated

ExifTool has now updated the time tag of all images in the directories specified in the timeShiftTable. The original images are preserved as XYZ.JPG_original files (XYZ being the original file name). By setting argument undo = TRUE, the orginals are restored and the modified images are deleted. The function will check if the number of JPG_original files and JPG files in folders is identical. If not, the function will not work. It does not check for consistency of file names.

timeshift_undo <- timeShiftImages(inDir               = wd_images_raw_copy,
                                 timeShiftTable       = timeShiftTable,
                                 stationCol           = "Station",
                                 hasCameraFolders     = FALSE,
                                 timeShiftColumn      = "timeshift",
                                 timeShiftSignColumn  = "sign",
                                 undo                 = TRUE

##                                                                   directory
## 1 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images/StationA
## 2 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images/StationB
##   n_images_undo
## 1             3
## 2             3

Date/Time problems with Reconyx Hyperfire cameras

Some Reconyx Hyperfire cameras don’t store date and time in the standard Exif format. Consequently, camtrapR cannot read the DateTimeOriginal tag from these images. This can be fixed easily by using the camtrapR function fixDateTimeOriginal or by following the instructions given by Mathias Tobler in the CameraBase documentation (page 7):

Renaming images

Raw images are copied from the raw image directories into a new location and renamed at the same time. The renamed file names follow this pattern (depending on whether there was one or more cameras per station):



Station ID and camera ID are derived from the raw image directory structure created earlier with createStationFolders Date and time are taken from image Exif metadata (read using ExifTool). (X) is a numeric identifier that is assigned to all images taken at the same station (and camera, if applicable) within one minute. This is to avoid identical image names if images were taken in the same second (or in the same minute, if cameras record time in hours and minutes only).

Again, please be aware that temporary directories are used in the example. Set outDir to a permanent directory.

 # raw image location
wd_images_raw <- system.file("pictures/raw_images", package = "camtrapR")      
  # destination for renamed images to be copied to
wd_images_raw_renamed <- file.path(tempdir(), "raw_images_renamed")       

renaming.table2 <- imageRename(inDir               = wd_images_raw,
                               outDir              = wd_images_raw_renamed,       
                               hasCameraFolders    = FALSE,
                               copyImages          = TRUE
## StationA : 3 images
## StationB : 3 images
# here is the information for a few images 
##                                                                                                        Directory
## 1 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationA
## 2 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationA
## 3 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationA
## 4 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationB
## 5 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationB
## 6 C:/Users/Jürgen Niedballa/AppData/Local/Temp/Rtmpcnd4z5/Rinstee44ef85d42/camtrapR/pictures/raw_images/StationB
##      FileName  Station Camera    DateTimeOriginal DateReadable
## 1 IMG0001.JPG StationA     NA 2009-04-10 05:07:00         TRUE
## 2 IMG0002.JPG StationA     NA 2009-04-21 00:40:00         TRUE
## 3 IMG0003.JPG StationA     NA 2009-04-22 20:19:00         TRUE
## 4 IMG0001.JPG StationB     NA 2009-04-05 00:11:00         TRUE
## 5 IMG0002.JPG StationB     NA 2009-04-05 23:13:00         TRUE
## 6 IMG0003.JPG StationB     NA 2009-04-07 00:23:00         TRUE
##                                                                              outDir
## 1 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationA
## 2 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationA
## 3 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationA
## 4 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationB
## 5 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationB
## 6 C:\\Users\\JRGENN~1\\AppData\\Local\\Temp\\RtmpOMmRCx/raw_images_renamed/StationB
##                            filename_new CopyStatus
## 1 StationA__2009-04-10__05-07-00(1).JPG       TRUE
## 2 StationA__2009-04-21__00-40-00(1).JPG       TRUE
## 3 StationA__2009-04-22__20-19-00(1).JPG       TRUE
## 4 StationB__2009-04-05__00-11-00(1).JPG       TRUE
## 5 StationB__2009-04-05__23-13-00(1).JPG       TRUE
## 6 StationB__2009-04-07__00-23-00(1).JPG       TRUE

So, the first image, "IMG0001.JPG" was renamed to "StationA__2009-04-10__05-07-00(1).JPG". Here is what the columns mean:

column content
Directory the raw image directory
FileName raw image file name
Station the station the image was taken at
Camera the camera ID (here NA because there were no camera subdirectories )
DateTimeOriginal Date and time in R-readable format
DateReadable whether the date could be read from the metadata or not (TRUE = yes)
outDir the directory the renamed image was copied to
filename_new the new file name
CopyStatus whether the images was copied successfully (TRUE = yes)

At this point you created a copy of your raw images and renamed them.