Introduction to the DataRobot R Package

Ron Pearson


The name DataRobot refers to three things: a Boston-based software company, the massively parallel modeling engine developed by the DataRobot company, and an open-source R package that allows interactive R users to connect to this modeling engine. This vignette provides a brief introduction to the datarobot R package, highlighting the following key details of its use:

To illustrate how the datarobot package is used, it is applied here to the Boston dataframe from the MASS package, providing simple demonstrations of all of the above steps.


The DataRobot modeling engine

The DataRobot modeling engine is a commercial product that supports massively parallel modeling applications, building and optimizing models of many different types, and evaluating and ranking their relative performance. This modeling engine exists in a variety of implementations, some cloud-based, accessed via the Internet, and others residing in customer-specific on-premises computing environments. The datarobot R package described here allows anyone with access to one of these implementations to interact with it from an interactive R session. Connection between the R session and the modeling engine is accomplished via HTTP requests, with an initial connection established in one of two ways described in the next section.

The DataRobot modeling engine is organized around modeling projects, each based on a single data source, a single target variable to be predicted, and a single metric to be optimized in fitting and ranking project models. This information is sufficient to create a project, identified by a unique alphanumeric projectId label, and start the DataRobot Autopilot, which builds, evaluates, and summarizes a collection of models. While the Autopilot is running, intermediate results are saved in a list that is updated until the project completes. The last stage of the modeling process constructs blender models, ensemble models that combine two or more of the best-performing individual models in various different ways. These models are ranked in the same way as the individual models and are included in the final project list. When the project is complete, the essential information about all project models may be obtained with the GetAllModels function described later in this note. This function returns an S3 object of class ‘listOfModels’, which is a list with one element for each project model. A plot method has been defined for this object class, providing a convenient way to visualize the relative performance of these project models.

Connecting to DataRobot

To access the DataRobot modeling engine, it is necessary to establish an authenticated connection, which can be done in either of two ways. In both cases, the necessary information is the endpoint - the URL address of the specific DataRobot server being used - and token, a previously validated access token.

token is unique for each DataRobot modeling engine account and can be accessed using DataRobot webapp in Account profile section.

endpoint depends on DataRobot modeling engine implementation (cloud-based, on-prem…) you are using. Contact your DataRobot admin for endpoint to use and to turn on API access to your account. The endpoint for DataRobot cloud accounts is

The first access method uses a YAML configuration file with these two elements - labeled token: and endpoint: - located at $HOME/.config/datarobot/drconfig.yaml. If this file exists when the datarobot package is loaded, a connection to the DataRobot modeling engine is automatically established. It is also possible to establish a connection using this YAML file via the ConnectToDataRobot function, by specifying the configPath parameter.

The second method of establishing a connection to the DataRobot modeling engine is to call the function ConnectToDataRobot with the endpoint and token parameters.

ConnectToDataRobot(endpoint ='', token='dqmtAG9B7pB7wIuxtmQ81s4BF0mWxZOi')

Creating a new project

One of the most common and important uses of the datarobot R package is the creation of a new modeling project. This task is supported by the following three functions:

The first step in creating a new DataRobot modeling project uses the SetupProject function, which has one required parameter, dataSource, that can be a dataframe, an object whose class inherits from dataframe (e.g., a data.table), or a CSV file. Although it is not required, the optional parameter projectName can be extremely useful in managing projects, especially as their number grows; in particular, while every project has a unique alphanumeric identifier projectId associated with it, this string is not easy to remember. Another optional parameter is maxWait, which specifies the maximum time in seconds before the project creation task aborts; increasing this parameter from its default value can be useful when working with large datasets.

While the SetupProject function uploads the data source and establishes the project, it does not start the model-building process. That is done by the SetTarget function, which takes two required parameters and allows a number of optional parameters. The required parameters are project, which can take either of the two forms described next, and target, a character string that names the response variable to be predicted by all models in the project. The project parameter can be specified either (1), as a list containing an element projectId, like that returned by the SetupProject function, or (2), as the projectId value from such a list. More generally, either of these two approaches can be used with any datarobot function that requires a project specification. Of the optional parameters for the SetTarget function, the only one discussed here is metric, a character string that specifies the measure to be optimized in fitting project models. Admissible values for this parameter are determined by the DataRobot modeling engine based on the nature of the target variable. A list of these values can be obtained using the function GetValidMetrics. Like SetTarget, the required parameters for this function are project and target, but here there are no optional parameters. The default value for the optional metric parameter in the SetTarget function call is NULL, which causes the default metric recommended by the DataRobot modeling engine to be adopted. For a complete discussion of the other optional parameters for the SetTarget function, refer to the help files. If the call to SetTarget is successful, a logical value of TRUE is returned and a message is displayed to the user; if not, the program aborts and displays an error message.

The Boston housing dataframe

To provide a specific illustration of how a new DataRobot project is created, the following discussion shows the creation of a project based on the Boston dataframe from the MASS package. This dataframe characterizes housing prices in Boston from a paper published in 1978 by Harrison and Rubinfeld (“Hedonic prices and the demand for clean air,” Journal of Environmental Economics and Management, vol. 5, 1978, pp. 81-102). The dataframe is described in more detail in the associated help file from the MASS package, but the str function shows its basic structure:

## 'data.frame':    506 obs. of  14 variables:
##  $ crim   : num  0.00632 0.02731 0.02729 0.03237 0.06905 ...
##  $ zn     : num  18 0 0 0 0 0 12.5 12.5 12.5 12.5 ...
##  $ indus  : num  2.31 7.07 7.07 2.18 2.18 2.18 7.87 7.87 7.87 7.87 ...
##  $ chas   : int  0 0 0 0 0 0 0 0 0 0 ...
##  $ nox    : num  0.538 0.469 0.469 0.458 0.458 0.458 0.524 0.524 0.524 0.524 ...
##  $ rm     : num  6.58 6.42 7.18 7 7.15 ...
##  $ age    : num  65.2 78.9 61.1 45.8 54.2 58.7 66.6 96.1 100 85.9 ...
##  $ dis    : num  4.09 4.97 4.97 6.06 6.06 ...
##  $ rad    : int  1 2 2 3 3 3 5 5 5 5 ...
##  $ tax    : num  296 242 242 222 222 222 311 311 311 311 ...
##  $ ptratio: num  15.3 17.8 17.8 18.7 18.7 18.7 15.2 15.2 15.2 15.2 ...
##  $ black  : num  397 397 393 395 397 ...
##  $ lstat  : num  4.98 9.14 4.03 2.94 5.33 ...
##  $ medv   : num  24 21.6 34.7 33.4 36.2 28.7 22.9 27.1 16.5 18.9 ...

To create the modeling project for this dataframe, we first use the SetupProject function:

projectObject <- SetupProject(dataSource = Boston, projectName = "BostonVignetteProject")

The list returned by this function gives the project name, the project identifier (projectId), the name of the temporary CSV file used to save and upload the Boston dataframe, and the time and date the project was created:

## $projectName
## [1] "BostonVignetteProject"
## $projectId
## [1] "56e86b47c80891539f2bc872"
## $fileName
## [1] "file119e54e27aa4_autoSavedDF.csv"
## $created
## [1] "2016-03-15T20:06:36.447729Z"

This function sets up a modeling project but does not start the process of model-building: to do that, we need to execute the function SetTarget, most simply by providing the project list returned by SetupProject and specifying the variable target to be predicted. Here, we specify “medv” as the response variable and we elect to use the default metric value chosen by the DataRobot modeling engine:

SetTarget(project = projectObject, target = "medv")

Since the DataRobot Autopilot successfully started a modeling project, this function returns the value TRUE and displays the message “Autopilot started” back to the user.

Retrieving project results

The DataRobot project created by the command described above fits 30 models to the Boston dataframe. Detailed information about all of these models can be obtained with the GetAllModels function, invoked with the project list returned by the SetupProject function. If the GetAllModels function is called before the DataRobot Autopilot has completed, an incomplete list is returned, along with a warning message. To avoid this problem, the WaitForAutopilot function can be used to force a wait until all models are available:

WaitForAutopilot(project = projectObject)
listOfBostonModels <- GetAllModels(projectObject)

The GetAllModels function returns an S3 object of class ‘listOfModels’, with one element for each model in the project. A summary method has been implemented for this object class, and it provides the following view of the contents of this list:

## $generalSummary
## [1] "First 6 of 30 models from: listOfBostonModels (S3 object of class listOfModels)"
## $detailedSummary
##                                                      modelType
## 1 Gradient Boosted Greedy Trees Regressor (Least-Squares Loss)
## 2                                                 ENET Blender
## 3                                                 ENET Blender
## 4                                                  AVG Blender
## 5                                         Advanced AVG Blender
## 6                             Gradient Boosted Trees Regressor
##                                                                                          expandedModel
## 1 Gradient Boosted Greedy Trees Regressor (Least-Squares Loss)::Tree-based Algorithm Preprocessing v15
## 2                                                                                         ENET Blender
## 3                                                                                         ENET Blender
## 4                                                                                          AVG Blender
## 5                                                                                 Advanced AVG Blender
## 6                                                   Gradient Boosted Trees Regressor::Open-Source Task
##                    modelId                      blueprintId
## 1 56e86b561f0d8d20596f5b94 45e6a473a324351a7867af171fd22983
## 2 56e86bdccf45e520f264abb6 96237fa6b351cc75cc01ed159ea33b7f
## 3 56e86bddcf45e520f264abba 693d71ec2b9669980edf8846d023d518
## 4 56e86bdccf45e520f264abae 7b8909256865d36293a6a466ab4a2650
## 5 56e86bdccf45e520f264abb2 da1cea809b8330b5b07f777adf597e69
## 6 56e86b561f0d8d20596f5b86 2fe946efb7398f20e120b80362020a83
##        featurelistName            featurelistId samplePct validationMetric
## 1 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          2.91752
## 2 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          3.24622
## 3 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          3.29761
## 4 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          3.31239
## 5 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          3.41212
## 6 Informative Features 56e86b4ef4737c20d2d6a4ac    63.834          3.48692

The first element of this list is generalSummary, which lets us know that the project includes 30 models, and that the second list element describes the first 6 of these models. This number is determined by the optional parameter nList for the summary method, which has the default value 6. The second list element is detailedSummary, which gives the first nList rows of the dataframe created when the method is applied to listOfBostonModels. Methods for the generic function are included in the datarobot package for all four ‘list of’ S3 model object classes: ‘listOfBlueprints’, ‘listOfFeaturelists’, ‘listOfModels’, and ‘projectSummarylist’. (Use of this function is illustrated in the following discussion; see the help files for more complete details.) This dataframe has the following eight columns:

  1. modelType: character string; describes the structure of each model
  2. expandedModel: character string; modelType with short descriptions of any preprocessing steps appended
  3. modelId: unique alphanumeric model identifier
  4. blueprintId: unique alphanumeric identifier for the blueprint used to fit the model
  5. featurelistName: name of the featurelist defining the modeling variables
  6. featurelistId: unique alphanumeric featurelist identifier
  7. samplePct: fraction of the training dataset used in fitting the model
  8. validationMetric: the value of the metric optimized in fitting the model, evaluated for the validation dataset

It is possible to obtain a more complete dataframe from any object of class ‘listOfModels’ by using the function with the optional parameter simple = FALSE. Besides the eight characteristics listed above, this larger dataframe includes, for every model in the project, additional project information along with validation, cross-validation, and holdout values for all of the available metrics for the project. For the project considered in this note, the result is a dataframe with 30 rows and 48 columns.

In addition to the summary method, a plot method has also been provided for objects of class ‘listOfModels’:

plot(listOfBostonModels, orderDecreasing = TRUE)

Horizontal barplot of modelType and validation set RMSE values for all project models This function generates a horizontal barplot that lists the name of each model (i.e., modelType) in the center of each bar, with the bar length corresponding to the value of the model fitting metric, evaluated for the validation dataset (i.e., the validationMetric value). The only required parameter for this function is the ‘listOfModels’ class S3 object to be plotted, but there are a number of optional parameters that allow the plot to be customized. In the plot shown above, the logical parameter orderDecreasing has been set to TRUE so that the plot - generated from the bottom up - shows the models in decreasing order of validationMetric. For a complete list of optional parameters for this function, refer to the help files.

Since smaller values of RMSE.validation are better, this plot shows the worst model at the bottom and the best model at the top. The identities of these models are most conveniently obtained by first converting listOfBostonModels into a dataframe, using the generic function mentioned above:

modelFrame <-
modelType <- modelFrame$modelType
metric <- modelFrame$validationMetric
bestModelType <- modelType[which.min(metric)]
worstModelType <- modelType[which.max(metric)]

From these results, we can see that the worst model is:

## [1] "Mean Response Regressor"

which is a trivial ``interecept-only’’ model that assigns the mean medv value to every record as its predicted response. This model is included in the project as a benchmark against which to compare the other, more useful prediction models. The best model in this project is:

## [1] "Gradient Boosted Greedy Trees Regressor (Least-Squares Loss)"

It is interesting to note that this single model, which is fairly complex in structure, actually outperforms all of the blender models (the next four models in the barplot above), formed by combining the best individual project models in different ways. This behavior is unusual, since the blender models usually achieve at least a small performance advantage over the component models on which they are based. In fact, since the individual component models may be regarded as constrained versions of the blender models (e.g., as a weighted average with all of the weight concentrated on one component), the training set performance can never be worse for a blender than it is for its components, but this need not be true of validation set performance, as this example demonstrates.

It is also important to note that several of the models in this plot appear to be identical, based on their modelType values, but they exhibit different performances. This is most obvious from the four models labelled ``Ridge Regressor,’’ but it is also true of six other modelType values, each of which appears two or three times in the plot, generally with different values for RMSE.validation. In fact, these models are not identical, but differ in the preprocessing applied to them, or in other details. In most cases, these differences may be seen by examining the expandedModel values from modelFrame:

##  [1] "Gradient Boosted Greedy Trees Regressor (Least-Squares Loss)::Tree-based Algorithm Preprocessing v15"    
##  [2] "ENET Blender"                                                                                            
##  [3] "ENET Blender"                                                                                            
##  [4] "AVG Blender"                                                                                             
##  [5] "Advanced AVG Blender"                                                                                    
##  [6] "Gradient Boosted Trees Regressor::Open-Source Task"                                                      
##  [7] "eXtreme Gradient Boosted Trees Regressor::Tree-based Algorithm Preprocessing v16"                        
##  [8] "Nystroem Kernel SVM Regressor::Regularized Linear Model Preprocessing v4"                                
##  [9] "RuleFit Regressor::Missing Values Imputed"                                                               
## [10] "Nystroem Kernel SVM Regressor::Regularized Linear Model Preprocessing v5"                                
## [11] "Support Vector Regressor (Radial Kernel)::Regularized Linear Model Preprocessing v5"                     
## [12] "Gradient Boosted Trees Regressor (Least-Squares Loss)::Tree-based Algorithm Preprocessing v2"            
## [13] "Breiman and Cutler Random Forest Regressor::Open-Source Task"                                            
## [14] "eXtreme Gradient Boosted Trees Regressor::Tree-based Algorithm Preprocessing v1"                         
## [15] "Gradient Boosted Trees Regressor (Least-Squares Loss)::Missing Values Imputed"                           
## [16] "RandomForest Regressor::Tree-based Algorithm Preprocessing v2"                                           
## [17] "RandomForest Regressor::Tree-based Algorithm Preprocessing v1"                                           
## [18] "ExtraTrees Regressor::Tree-based Algorithm Preprocessing v17"                                            
## [19] "RandomForest Regressor::Missing Values Imputed"                                                          
## [20] "eXtreme Gradient Boosted Trees Regressor (Poisson Loss)::Tree-based Algorithm Preprocessing v2"          
## [21] "Ridge Regressor::Regularized Linear Model Preprocessing v14"                                             
## [22] "Ridge Regressor::Constant Splines"                                                                       
## [23] "Linear Regression::Missing Values Imputed::Standardize"                                                  
## [24] "Elastic-Net Regressor (mixing alpha=0.5 / Least-Squares Loss)::Regularized Linear Model Preprocessing v1"
## [25] "Ridge Regressor::Regularized Linear Model Preprocessing v1"                                              
## [26] "Ridge Regressor::Missing Values Imputed::Standardize"                                                    
## [27] "Auto-tuned K-Nearest Neighbors Regressor (Minkowski Distance)::Missing Values Imputed::Standardize"      
## [28] "Auto-tuned K-Nearest Neighbors Regressor (Minkowski Distance)::Regularized Linear Model Preprocessing v5"
## [29] "Decision Tree Regressor::Missing Values Imputed"                                                         
## [30] "Mean Response Regressor"

In particular, note that the modelType value appears at the beginning of the expandedModel character string, which is then followed by any pre-processing applied in fitting the model. Thus, comparing elements 21, 22, 25, 26 from this list, we can see that, while these are all ridge regression models, they differ in their preprocessing steps. In the case of the ENET blender models, the differences lie in the component models incorporated into the blend and are not evident from this list.

Generating model predictions

The generation of model predictions is a three-step process:

  1. Upload dataset for prediction using UploadPredictionDataset.
  2. Create a predict job using RequestPredictionsForDataset function, which returns the predictJobId.
  3. Pass the predictJobId to GetPredictions along with the projectId for the DataRobot project containing the model. The result returned by this function is a vector of predicted responses; in the case of binary classification projects, the optional type parameter may be used to request a vector of probabilities instead of binary responses; refer to the help files for details.

As a specific example, the following code sequence identifies the model with the best performance, extracts it as bestModel, and generates predictions for it from the Boston dataframe:

bestIndex <- which.min(metric)
bestModel <- listOfBostonModels[[bestIndex]]
dataset <- UploadPredictionDataset(projectObject, Boston)
bestPredictJobId <- RequestPredictionsForDataset(projectObject, bestModel$modelId, dataset$id)
bestPredictions <- GetPredictions(projectObject, bestPredictJobId)

The plot below shows predicted versus observed medv values for this model. If the predictions were perfect, all of these points would lie on the dashed red equality line. The relatively narrow scatter of most points around this reference line suggests that this model is performing reasonably well for most of the dataset, with a few significant exceptions.


This note has presented a general introduction to the datarobot R package, describing and illustrating its most important functions. To keep this summary to a manageable length, no attempt has been made to describe all of the package’s capabilities; for a more detailed discussion, refer to the help files.