This vignette is identical to E. Pebesma, Mailund, and Hiebert (2016), except for two changes:

- it has been synchronized with updates to the units package
- it has been converted to R-markdown

We briefly review SI units, and discuss R packages that deal with measurement units, their compatibility and conversion. Built upon udunits2 and the UNIDATA udunits library, we introduce the package units that provides a class for maintaining unit metadata. When used in expression, it automatically converts units, and simplifies units of results when possible; in case of incompatible units, errors are raised. The class flexibly allows expansion beyond predefined units. Using units may eliminate a whole class of potential scientific programming mistakes. We discuss the potential and limitations of computing with explicit units.

Two quotes from Cobb and Moore (1997) – *Data are not just numbers, they are numbers with a context* and *in data analysis, context provides meaning* – illustrate that for a data analysis to be meaningful, knowledge of the data’s context is needed. Pragmatic aspects of this context include who collected or generated the data, how this was done, and for which purpose (Scheider et al. 2016); semantic aspects concern what the data represents: which aspect of the world do the data refer to, when and where were they measured, and what a value of `1`

means.

R does allow for keeping some context with data, for instance

`data.frame`

columns must have and`list`

elements may have names that can be used to describe context, using freetext`matrix`

or`array`

objects may have`dimnames`

- for variables of class
`factor`

or`ordered`

,`levels`

may indicate, using freetext, the categories of nominal or ordinal variables `POSIXt`

and`Date`

objects specify how numbers should be interpreted as time or date, with fixed units (second and day, respectively) and origin (Jan 1, 1970, 00:00 UTC)`difftime`

objects specify how time duration can be represented by numbers, with flexible units (secs, mins, hours, days, weeks); lubridate (Grolemund and Wickham 2011) extends some of this functionality.

Furthermore, if spatial objects as defined in package sp (E. Pebesma and Bivand 2005) have a proper coordinate reference system set, they can be transformed to other datums, or converted to various flat (projected) representations of the Earth (Iliffe and Lott 2008).

In many cases however, R drops contextual information. As an example, we look at annual global land-ocean temperature index (from `http://climate.nasa.gov/vital-signs/global-temperature/`

) since 1960:

```
temp_data = subset(read.table("647_Global_Temperature_Data_File.txt",
header=TRUE)[1:2], Year >= 1960)
temp_data$date = as.Date(paste0(temp_data$Year, "-01-01"))
temp_data$time = as.POSIXct(temp_data$date)
Sys.setenv(TZ="UTC")
head(temp_data, 3)
## Year Annual_Mean date time
## 81 1960 -0.03 1960-01-01 1960-01-01
## 82 1961 0.05 1961-01-01 1961-01-01
## 83 1962 0.02 1962-01-01 1962-01-01
year_duration = diff(temp_data$date)
mean(year_duration)
## Time difference of 365.2545 days
```

Here, the time difference units are reported for the `difftime`

object `year_duration`

, but if we would use it in a linear algebra operation

```
year_duration %*% rep(1, length(year_duration)) / length(year_duration)
## [,1]
## [1,] 365.2545
```

the unit is dropped. Similarly, for linear regression coefficients we see

```
coef(lm(Annual_Mean ~ date, temp_data))
## (Intercept) date
## 1.833671e-02 4.364763e-05
coef(lm(Annual_Mean ~ time, temp_data))
## (Intercept) time
## 1.833671e-02 5.051809e-10
```

where the unit of change is in degrees Celsius but either *per day* (`date`

) or *per second* (`time`

). For purely mathematical manipulations, R often strips context from numbers when it is carried in attributes, the linear algebra routines being a prime example.

Most variables are somehow attributed with information about their *units*, which specify what the value `1`

of this variable represents. This may be counts of something, e.g. `1 apple`

, but it may also refer to some *physical unit*, such as distance in meter. This article discusses how strong unit support can be introduced in R.

The BIPM (Bureau International des Poids et Mesures) is “*the intergovernmental organization through which Member States act together on matters related to measurement science and measurement standards. Its recommended practical system of units of measurement is the International System of Units (Syst`{e}me International d’Unit'{e}s, with the international abbreviation SI)* (http://www.bipm.org/en/measurement-units/)”.

International Bureau of Weights and Measures, Taylor, and Thompson (2001) describe the SI units, where, briefly, *SI units*

- consist of seven base units (length, mass, time & duration, electric current, thermodynamic temperature, amount of substance, and luminous intensity), each with a name and abbreviation (see table below)
- consist of
*derived units*that are formed by products of powers of base units, such as m/s\(^2\), many of which have special names and symbols (e.g. angle: 1 rad = 1 m/m; force: 1 N = 1 m kg s\(^{-2}\)) - consist of
*coherent derived units*when derived units include no numerical factors other than one (with the exception of`kg`

; as a base unit, kg can be part of coherent derived units); an example of a coherent derived unit is 1 watt = 1 joule per 1 second, - may contain SI prefixes (k = kilo for \(10^3\), m = milli for \(10^{-3}\), etc.)
- contain special quantities where units disappear (e.g., m/m) or have the nature of a count, in which cases the unit is 1.

base quantities, SI units and their symbols (from International Bureau of Weights and Measures, Taylor, and Thompson (2001), p. 23):

Base quantity | SI base unit | ||
---|---|---|---|

Name | Symbol | Name | Symbol |

length | \(l,x,r,\) etc. | meter | m |

mass | \(m\) | kilogram | kg |

time, duration | \(t\) | second | s |

electric current | \(I, i\) | ampere | A |

thermodynamic temperature | \(T\) | kelvin | K |

amount of substance | \(n\) | mole | mol |

luminous intensity | \(I_v\) | candela | cd |

`udunits2`

R packageUdunits, developed by UCAR/UNIDATA, advertises itself on its web page as: “*The udunits package supports units of physical quantities. Its C library provides for arithmetic manipulation of units and for conversion of numeric values between compatible units. The package contains an extensive unit database, which is in XML format and user-extendable.*”

The R package udunits2 (Hiebert 2015) provides an R level interface to the most important functions in the C library.

The functions provided by udunits2 are

```
library(udunits2)
## udunits system database read
ls(2)
## [1] "ud.are.convertible" "ud.convert" "ud.get.name"
## [4] "ud.get.symbol" "ud.have.unit.system" "ud.is.parseable"
## [7] "ud.set.encoding"
```

Dropping the `ud`

prefix, `is.parseable`

verifies whether a unit is parseable

```
ud.is.parseable("m/s")
## [1] TRUE
ud.is.parseable("q")
## [1] FALSE
```

`are.convertible`

specifies whether two units are convertible

```
ud.are.convertible("m/s", "km/h")
## [1] TRUE
ud.are.convertible("m/s", "s")
## [1] FALSE
```

`convert`

converts units that are convertible, and throws an error otherwise

```
ud.convert(1:3, "m/s", "km/h")
## [1] 3.6 7.2 10.8
```

and `get.name`

, `get.symbol`

and `set.encoding`

get name, get symbol or modify encoding of the character unit arguments.

```
ud.get.name("kg")
## [1] "kilogram"
ud.get.symbol("kilogram")
## [1] "kg"
ud.set.encoding("utf8")
## NULL
```

Unlike the measurements and NISTunits, udunits2 parses units as expressions, and bases its logic upon the convertibility of expressions, rather than the comparison of fixed strings:

```
m100_a = paste(rep("m", 100), collapse = "*")
dm100_b = "dm^100"
ud.is.parseable(m100_a)
## [1] TRUE
ud.is.parseable(dm100_b)
## [1] TRUE
ud.are.convertible(m100_a, dm100_b)
## [1] TRUE
```

This has the advantage that through complex computations, intermediate objects can have units that are arbitrarily complex, and that can potentially be simplified later on. It also means that the package practically supports an unlimited amount of derived units.

Another set of encodings for measurement units is the Unified Code for Units of Measure (UCUM, Schadow and McDonald (2009)). A dedicated web site describes the details of the differences between udunits and UCUM, and provides a conversion service between the two encoding sets.

The UCUM website refers to some Java implementations, but some of the links seem to be dead. UCUM is the preferred encoding for standards from the Open Geospatial Consortium. udunits on the other hand is the units standard of choice by the climate science community, and is adopted by the CF (Climate and Forecast) conventions, which mostly uses NetCDF. NetCDF (Rew and Davis 1990) is a binary data format that is widely used for atmospheric and climate model predictions.

The udunits library is a C library that has strong support from UNIDATA, and we decided to build our developments on this, rather than on Java implementations of UCUM with a less clear provenance.

The units package builds `units`

objects from scratch, where `m`

, created by

```
library(units)
##
## Attaching package: 'units'
## The following object is masked from 'package:base':
##
## %*%
m = make_unit("m")
str(m)
## Class 'units' atomic [1:1] 1
## ..- attr(*, "units")=List of 2
## .. ..$ numerator : chr "m"
## .. ..$ denominator: chr(0)
## .. ..- attr(*, "class")= chr "symbolic_units"
```

represents `1 m`

, one meter. Other length values are obtained by using this unit in an expression:

`x1 = 1:5 * m`

As an alternative to using `make_unit`

, we can retrieve units directly from the `ud_units`

database, which is part of units, and was derived from the xml units database that is part of udunits. Two ways of doing this are

```
x2 = 1:5 * ud_units$m
identical(x1, x2)
## [1] TRUE
x3 = 1:5 * with(ud_units, m)
identical(x1, x3)
## [1] TRUE
```

Although one could attach `ud_units`

to use the units directly, there are over 3000 and this would not only clobber the namespace but also lead to conflicts, e.g. for `T`

(Tesla, `TRUE`

) or `in`

(inch, reserved R language element). The last form using `with`

has the advantage that it can take direct expressions:

```
with(ud_units, m/s^2)
## 1 m/s^2
```

A convenience function that directly evaluates a units expression in the environment `ud_units`

, thus avoiding `with`

, is `set_units`

:

```
set_units(1:5, cm)
## Units: cm
## [1] 1 2 3 4 5
library(magrittr)
1:5 %>% set_units(N/s)
## Units: N/s
## [1] 1 2 3 4 5
```

Several manipulations with `units`

objects will now be illustrated.

Manipulations that do not involve unit conversion are for instance addition:

```
x = set_units(1:3, m/s)
x + 2 * x
## Units: m/s
## [1] 3 6 9
```

Explicit unit conversion is done by assigning new units:

```
(x = set_units(x, cm/s))
## Units: cm/s
## [1] 100 200 300
as.numeric(x)
## [1] 100 200 300
```

similar to the behaviour of `difftime`

objects, this modifies the numeric values without modifying their meaning (what the numbers refer to).

When mixing units in sums, comparisons or concatenation, units are automatically converted to those of the first argument:

```
y = set_units(1:3, km/h)
x + y
## Units: cm/s
## [1] 127.7778 255.5556 383.3333
y + x
## Units: km/h
## [1] 4.6 9.2 13.8
x == y
## [1] FALSE FALSE FALSE
c(y, x)
## Units: km/h
## [1] 1.0 2.0 3.0 3.6 7.2 10.8
```

where `c(y, x)`

concatenates `y`

and `x`

after converting `x`

to the units of `y`

. Derived units are created where appropriate:

```
x * y
## Units: cm*km/h/s
## [1] 100 400 900
x^3
## Units: cm^3/s^3
## [1] 1.0e+06 8.0e+06 2.7e+07
```

and meaningful error messages appear when units are not compatible:

```
e = try(z <- x + x * y)
attr(e, "condition")[[1]]
## [1] "cannot convert cm*km/h/s into cm/s"
```

The full set of methods and method groups for `units`

objects is shown by

```
methods(class = "units")
## [1] %*% Math Ops Summary [
## [6] all.equal as.Date as.POSIXct as.data.frame as_units
## [11] c diff format hist mean
## [16] median plot print quantile rep
## [21] seq summary units units<- weighted.mean
## see '?methods' for accessing help and source code
```

where the method groups

`Ops`

include operations that require compatible units, converting when necessary (`+`

,`-`

,`==`

,`!=`

,`<`

,`>`

,`<=`

,`>=`

), and operations that create new units (`*`

,`/`

,`^`

and`**`

),`Math`

include`abs`

,`sign`

,`floor`

,`ceiling`

,`trunc`

,`round`

,`signif`

,`log`

,`cumsum`

,`cummax`

,`cummin`

, and`Summary`

include`sum`

,`min`

,`max`

and`range`

, and all convert to the unit of the first argument.

When possible, new units are simplified:

```
a = set_units(1:10, m/s)
b = set_units(1:10, h)
a * b
## Units: m
## [1] 3600 14400 32400 57600 90000 129600 176400 230400 291600 360000
ustr1 = paste(rep("m", 101), collapse = "*")
ustr2 = "dm^100"
as_units(ustr1) / as_units(ustr2)
## 1e+99 m
```

Units are printed as simple R expressions, e.g.

```
set_units(1, m^5/s^4)
## 1 m^5/s^4
```

Another way to print units commonly seen in Climate and Forecast Conventions is `m2 s-1`

for m\(^2\)/s. These are not R expressions, but they can be parsed by `as_units`

, and created by `deparse_unit`

:

```
as_units("m2 s-1")
## 1 m^2/s
deparse_unit(set_units(1, m^2*s^-1))
## [1] "m2 s-1"
```

The `plot`

and `hist`

methods add units to default axis labels, an example is shown in the following figures. For ggplot2 plots (Wickham 2009), automatic unit placement in default axis label is provided by package ggforce (Pedersen 2016); `demo(ggforce)`

gives an example.

```
library(units)
units_options(negative_power = TRUE)
gallon = make_unit("gallon")
# initialize units:
mtcars$consumption = set_units(mtcars$mpg, mi/gallon)
# "in" is also a reserved R keyword, and needs special treatment:
mtcars$displacement = set_units(mtcars$disp, `in`^3)
# convert to SI:
mtcars$consumption = set_units(mtcars$consumption, km/l)
mtcars$displacement = set_units(mtcars$displacement, cm^3)
par(mar = par("mar") + c(0, .3, 0, 0))
with(mtcars, plot(1/displacement, 1/consumption))
```

```
library(ggforce)
## Loading required package: ggplot2
if (utils::packageVersion("ggplot2") > "2.2.1")
ggplot(mtcars) + geom_point(aes(x = 1/displacement, y = 1/consumption))
```

Automatic conversion between `units`

and `difftime`

is provided:

```
(dt = diff(Sys.time() + c(0, 1, 1+60, 1+60+3600))) # class difftime
## Time differences in secs
## [1] 1 60 3600
(dt.u = as_units(dt))
## Units: s
## [1] 1 60 3600
identical(as_difftime(dt.u), dt)
## [1] TRUE
```

as well as to and from `POSIXct`

or `Date`

:

```
(t1 <- as_units(as.POSIXct("2017-08-20 17:03:00")))
## 1503248580 (seconds since 1970-01-01 00:00:00 +00:00)
(t2 <- as_units(as.POSIXct("2017-08-20 17:03:00"), "hours since 2017-08-20"))
## 17.05 (hours since 2017-08-20)
(d1 <- as_units(as.Date("2017-08-20")))
## 17398 (days since 1970-01-01)
as.POSIXct(t1)
## [1] "2017-08-20 17:03:00 UTC"
as.Date(d1)
## [1] "2017-08-20"
```

Objects of class `units`

can be used as columns in `data.frame`

objects, as well as in `tbl_df`

(Wickham, Francois, and Müller 2016). They can also be `matrix`

or `array`

, with the constraint that a single unit holds for all elements.

The units R package provides a new class, `units`

, for numeric data with associated measurement units. Operations on objects of this class retain the unit metadata and provide automated dimensional analysis: dimensions are taken into consideration in computations and comparisons. Combining different units that are compatible triggers automatic unit conversion, derived units are automatically generated and simplified where possible, and meaningful error messages are given when a user tries to add objects with incompatible units. This verifies that computations are not only syntactically and numerically allowed, but also semantically, and in the case of physical units, physically allowed, which may support code verification and provenance tracking. Using this package may eliminate a whole class of potential scientific programming mistakes.

Where the R packages measurements and NISTunits provide conversion between a fixed number of units, with the help of the udunits library and unit database R package units allows for arbitrarily complex derived units. By treating units as expressions it can derive, convert and simplify units. In addition, beyond the SI units packaged, units handles user-defined units not supported by udunits.

Data in `units`

vectors can be stored as columns in `data.frame`

or `tbl_df`

objects, and can be converted to and from `difftime`

. When `units`

objects have associated time and location information, they could be stored in spatial or spatio-temporal objects provided by sp or spacetime (E. Pebesma 2012) as these store attribute data in `data.frame`

slots, but for instance not in `zoo`

(Zeileis and Grothendieck 2005) or `xts`

(Ryan and Ulrich 2014) objects, as these latter two set the class attribute of a vector or matrix.

Despite all standardization efforts, units may still be ambiguous, or subject to interpretation. For instance for the duration of one year NISTunits or udunits2 give us an answer that depends on whether we want a common, leap, Gregorian, Julian, tropical or siderial year (Lang (2006), see also `demo(year)`

). This illustrates that those who apply unit conversion should be aware of possible pitfalls. Support for calendars in udunits seems not as well developed as in R.

Future work includes extending packages that read external data from formats, databases or interfaces with support for measurement unit information into R, preserving the measurement unit information. Examples would be interfaces to HDF5 (e.g., h5, Annau (2016)), RNetCDF (Michna and Woods 2016) or sos4R (Nüst, Stasch, and Pebesma 2011). It would be nice to see units of measurements propagate into units of regression coefficient estimates.

We acknowledge three anonymous reviewers and the handling editor for their constructive comments, and Thomas Lin Pedersen for implementing the ggplot extensions in package `ggforce`

that automatically add units to default ggplot axis labels.

Annau, Mario. 2016. *H5: Interface to the ’Hdf5’ Library*. https://CRAN.R-project.org/package=h5.

Birk, Matthew A. 2016. *Measurements: Tools for Units of Measurement*. https://CRAN.R-project.org/package=measurements.

Cobb, George W., and David S. Moore. 1997. “Mathematics, Statistics, and Teaching.” *American Mathematical Monthly*, 801–23.

Gama, Jose. 2014. *NISTunits: Fundamental Physical Constants and Unit Conversions from Nist*. https://CRAN.R-project.org/package=NISTunits.

Grolemund, Garrett, and Hadley Wickham. 2011. “Dates and Times Made Easy with Lubridate.” *Journal of Statistical Software* 40 (1): 1–25. doi:10.18637/jss.v040.i03.

Hiebert, James. 2015. *Udunits2: Udunits-2 Bindings for R*.

Iliffe, Jonathan, and Roger Lott. 2008. *Datums and Map Projections: For Remote Sensing, Gis and Surveying*. CRC Inc.

International Bureau of Weights and Measures, Barry N Taylor, and Ambler Thompson. 2001. “The International System of Units (SI).” US Department of Commerce, Technology Administration, National Institute of Standards; Technology.

Lang, K.R. 2006. *Astrophysical Formulae Volume Ii: Space, Time, Matter and Cosmology, 3rd Edition 1999. 2nd Printing*. Springer.

Michna, Pavel, and Milton Woods. 2016. *RNetCDF: Interface to Netcdf Datasets*. https://CRAN.R-project.org/package=RNetCDF.

Nüst, D., C. Stasch, and E. J. Pebesma. 2011. “Connecting R to the Sensor Web.” In, edited by S. Geertman, W. Reinhardt, and F. Toppen, 227–46. Lecture Notes in Geoinformation and Cartography. Springer.

Pebesma, Edzer. 2012. “Spacetime: Spatio-Temporal Data in R.” *Journal of Statistical Software* 51 (1): 1–30. doi:10.18637/jss.v051.i07.

Pebesma, Edzer, and Roger Bivand. 2005. “Classes and Methods for Spatial Data in R.” *R News* 5 (2): 9–13. https://cran.r-project.org/doc/Rnews/.

Pebesma, Edzer, Thomas Mailund, and James Hiebert. 2016. “Measurement Units in R.” *The R Journal* 8 (2): 486–94. https://journal.r-project.org/archive/2016-2/pebesma-mailund-hiebert.pdf.

Pedersen, Thomas Lin. 2016. *Ggforce: Accelerating ’Ggplot2’*. https://CRAN.R-project.org/package=ggforce.

Rew, Russ, and Glenn Davis. 1990. “NetCDF: An Interface for Scientific Data Access.” *IEEE Computer Graphics and Applications* 10 (4). IEEE: 76–82.

Ryan, Jeffrey A., and Joshua M. Ulrich. 2014. *Xts: EXtensible Time Series*. https://CRAN.R-project.org/package=xts.

Schadow, Gunther, and Clement J McDonald. 2009. “The Unified Code for Units of Measure.” *Regenstrief Institute and UCUM Organization: Indianapolis, IN, USA*.

Scheider, Simon, Benedikt Gräler, Edzer Pebesma, and Christoph Stasch. 2016. “Modeling Spatiotemporal Information Generation.” *International Journal of Geographical Information Science* 30 (10): 1980–2008. http://dx.doi.org/10.1080/13658816.2016.1151520.

Wickham, Hadley. 2009. *Ggplot2: Elegant Graphics for Data Analysis*. Springer-Verlag New York. http://ggplot2.org.

Wickham, Hadley, Romain Francois, and Kirill Müller. 2016. *Tibble: Simple Data Frames*. https://CRAN.R-project.org/package=tibble.

Zeileis, Achim, and Gabor Grothendieck. 2005. “Zoo: S3 Infrastructure for Regular and Irregular Time Series.” *Journal of Statistical Software* 14 (6): 1–27. doi:10.18637/jss.v014.i06.