pavo 2.0.0

NEW FEATURES * image-based workflow for the combined analysis of colour and pattern geometry * added the visual systems of the (trichromatic) jumping spider Habronattus pyrrithrix and the (trichromatic) triggerfish Rhinecanthus aculeatus * getspec() can now read Avantes binary files (.TRM files)

MINOR FEATURES AND BUG FIXES * Carotenoid chroma (S9) in summary.rspec() has been fixed to (R700 - R450)/R700. This gives the same result as before but with a flipped sign, and better reflects the original formula in the literature. * cieLAB values have been rescaled, and are expressed in the more standard range: L [0,100], ab [-128,127] * getspec() has an additional argument ignore.case set to TRUE by default to ignore case in file extension matching * fix a bug where getspec() would sometimes fail with files including numbers in scientific format * add a new option in tetraplot() to add cone names (u,s,m,l)

pavo 1.4.0

NEW FEATURES

• getspec() can now read OceanOptics .ProcSpec files
• added the visual system of Ctenophorous ornatus, the (trichromatic) ornate dragon lizard

MAJOR CHANGES

• getspecf() (and the argument fast = TRUE in getspec()) have been deprecated
• summary.rspec() returned incorrect values for S7. If you use S7, please re-run your analyses

MINOR FEATURES AND BUG FIXES

• summary.rspec() now properly outputs NA for monotonically decreasing spectra
• fixed warning when subset.rspec() was provided with a logical vector
• fixed harmless warning when summary.colspace() was used on a tcs object
• by argument in merge.rspec() is no longer ignored
• fixed bug in voloverlap() when plot = TRUE
• fixed bug in vismodel() when transmission has more than one column
• fixed bug in vismodel() that applied von Kries correction to achromatic channel
• added argument fill=FALSE in voloverlap()
• fixed bug in jndplot() when suppressing the plotting of arrows
• better handling of subset data when using summary.colspace() and summary.vismodel()
• fixed bug in coldist() when noise = "quantum" and achro = TRUE were used
• fixed bug in jndplot() when arrow = "none" and achro = TRUE
• spec2rgb() now takes into account the 390-400 nm wavelength range into account when possible
• as.rspec() no longer fails with tibbles
• bin option of procspec() now works for all values of bins
• non-relative quantum catches from dataframe object were not correctly scaled in “di”, “tri”, “categorical” and “coc” colspaces
• fixed a bug in colspace() where it would incorrectly infer a preference for a general trichromatic space, when a cie model is more appropriate
• fixed a bug so that cie color matching functions can be more easily be used in a general trichromatic space (i.e. maxwell triangle)

pavo 1.3.1

NEW FUNCTIONS

• bootcoldist() uses bootstrap to calculate the confidence intervals on the mean color distance between samples

MINOR FEATURES AND BUG FIXES

• fixed bug in coldist() when fewer samples than the number of photoreceptors
• fixed bug in getspec() that would cause it to crash with errors
• fixed bug in tetraplot() when saving images

pavo 1.3.0

NEW FUNCTIONS

• jnd2xyz() converts distances (in JND, resulting from a coldist() call) into cartesian coordinates
• plot() methods for objects resulting from jnd2xyz()
• jndrot() produces rotations of Cartesian coordinates resulting from jnd2xyz()
• coldist2mat() converts coldist() result from a pairwise data.frame to a distance matrix
• sensdata() function for retrieving and/or visualising pavo’s in-build spectral data

MAJOR CHANGES

• tetraplot() and cieplot() have been completely rewritten to allow finer viewing control
• tetraplot() allows forced perspective using size to denote distance
• voloverlap() and vol() have also been changed to work with the new tetraplot() options
• getspec() has been rewritten to be faster, more general, and allow parallel processing
• subset functions now allow more than one argument to be used, and allow further attributes to be passed onto grep (e.g. invert = TRUE)

MINOR FEATURES AND BUG FIXES

• fixed bug in coldist() on log-transformation when object was neither of class vismodel nor colspace
• fixed bug in dL calculation when input is a colspace object
• fixed bug in vismodel() when a data frame, matrix or rspec object was passed as the background
• fixed bug in colspace() models when using non-standard receptor names or ordering
• fixed bug in hexagon() model when calculating location & metrics for achromatic stimuli
• fixed location of red vertex in tetraplot()
• fixed bug in the argument names for expanding text labels in colspace plots
• removed na.rm argument from aggspec() that was causing a bug when the error function did not have that argument. User should pass it as an argument to the function if necessary.
• changed default to achro=FALSE in coldist()
• replaced the modelled receptor sensitivities of the honeybee Apis melifera with the empirical sensitivities from Peitsch et al (1992)
• the built-in ‘green’ background spectrum is no longer normalized
• removed wavelength limitations in the calculation of H3 from summary.rspec
• all visual systems (except CIE) have been normalized to have an integral of 1

pavo 1.2.0

MAJOR CHANGES

• added the CIELch model accessed via colspace(space = ‘cielch’)
• added the sensdata() function for retrieving and/or visualising pavo’s in-build spectral data

MINOR FEATURES AND BUG FIXES

• vignettes have been amalgamated & the single, main vignette is now up-to-date
• added more informative labels for the segment analysis plot

pavo 1.1.0

NEW FUNCTIONS

• segspace() replaces the deprecated segclass(), and is accessed via the colspace() argument space = ‘segment’. The results of segspace() are also now compatible with coldist() for the estimation of Euclidean colour-distances.
• segplot() is a plot for Endler’s (1990) segment analysis, and is accessed — along with all other 2d plots — via plot.colspace()

MINOR FEATURES AND BUG FIXES

• the use of relative quantum catches is now optional in the categorical colorspace (though still produces a warning), for greater flexibility
• updated several functions to work when rspec object has only one spectrum
• fixed bug in voloverlap where interactive plots would result in error
• fixed incorrect labels in the maxwell triangle plot
• fixed a bug in as.rspec() in which lim was not applied when interpolate = FALSE
• fixed bug in aggplot() which resulted in error when using lty, lwd arguments
• warning if ocular media is being used in both vismodel() and sensmodel()
• added an ‘all’ option to the achromatic argument in vismodel()
• added the ability to calculate dL for cielab models in coldist()
• added some more informative messages and warnings

pavo 1.0

• See vignette for detailed description of changes.

MAJOR CHANGES

• coldist() arguments have been changed. Now the empirically estimated value for the Weber fraction must be entered, instead of the noise-to-signal ratio. The noise-to-signal ratio is then calculated based on the empirically estimated Weber fraction for the reference cone type, and applied to the remaining cone types. This should avoid confusion between empirically estimated values for the Weber fraction and the noise-to-signal ratio, which are currently prevalent in the literature.
• coldist() now has an additional argument, weber.achro, so that the value for the Weber fraction to be used to calculate achromatic contrast can be input independently of the cone ratios.
• tcs() is deprecated, replaced by colspace().

NEW FUNCTIONS

• colspace() replaces tcs() and introduces several new colorspaces
• plot() methods for several colspace() outputs, including a static tetrahedral colorspace
• projpoints() allows the plotting of points in a projplot() figure
• vol() draws volume polygons in static tetrahedral plots
• axistetra() draws reference x, y and z axis arrows in static tetrahedral plots
• legendtetra() adds legends to static tetrahedral plots

MINOR FEATURES AND BUG FIXES

• summary.colspace() for tcs spaces now returns relative color volume as well as absolute
• tcsvol() and voloverlap() now allow control for line width
• procspec() fixed error when attempting to smooth rspec object without column names
• procspec() handles smoothing before fixing negatives to avoid re-adding negatives when smoothing
• procspec(), aggplot() accept additional arguments to summary functions (e.g., na.rm=TRUE)
• peakshape() default wavelength limits (lim) now taken from rspec object rather than 300-700
• peakshape() returns warning if a spectrum contains duplicate reflectance values
• summary.rspec() works with single spectra
• aggplot() and aggspec() fixed bug on ordering of levels when they don’t match the sequence in the rspec object
• aggplot() added logical argument “legend” for automatically adding a legend to the plot
• vismodel() returns error if bkg=NULL
• getspec() patched to stop returning warnings in Yosemite
• getspec() has a faster (~5-10X), but less flexible, algorithm used when all input files are from the same source.

pavo 0.5-6

BUG FIXES

• fixed bug in calculaiton of dichromat contrast in coldist()

pavo 0.5-5

MINOR FEATURES AND BUG FIXES

• fixed bug in calculaiton of H3 in summary.rspec()

pavo 0.5-4

MINOR FEATURES AND BUG FIXES

• changed default values for coldist()

pavo 0.5-2

MINOR FEATURES AND BUG FIXES

• fixes to the blue tit visual system, changed vismodel() argument to “bluetit”

pavo 0.5-1

MINOR FEATURES AND BUG FIXES

• vismodel() accepts matrix, data.frame or rspec objects for the illuminant, updated warning messages associated with this use
• vismodel() accepts user-defined achromatic receptors
• tcsplot(), tcsvol() & tcspoints(): transparency control passed to user
• getspec() works with OceanView files

pavo 0.5

• updated citation()

MINOR FEATURES AND BUG FIXES

• vismodel() vonkries = TRUE does not return a NULL result
• vismodel() works with a single spectrum object
• tcsplot() allows greater control of tetrahedron appearance
• summary.rspec() allows for user-defined minimum wavelength (for calculation of UV variables)

pavo 0.3-1

NEW FUNCTIONS

• irrad2flux() and flux2irrad() to convert illuminant measurements

MINOR FEATURES AND BUG FIXES

• vismodel() less cryptic error messages
• as_rspec() fix message pertaining wavelength column
• getspec() now removes empty columns (generated by bad tabulation)
• plot.rspec() fix color labeling issue (previously, when user specified fewer colors than number of spectra, ‘stack’ and ‘overlay’ colored spectra differently)

pavo 0.3

NEW FUNCTIONS

• subset() class methods for rspec, vismodel and tcs
• summary() method for vismodel, returns attributes used in visual model

VISUAL MODEL

• vismodel() output includes only Qi or fi (as selected by qcatch argument)
• vismodel() von Kries correction is now an optional argument
• coldist() subset argument for partial filtering
• Updated sensitivity curves

MINOR FEATURES

• getspec() works with Avasoft 8 output
• aggspec() if no “by” argument is supplied, applies function to all spectra

BUG FIXES

• tcs() accepts receptor names other than usml, issues warning
• aggplot() allows control for different line types per spectra
• voloverlap() now assigns darkgrey color for overlap if color vector is of length 1 or 2

pavo 0.1-2

NEW FUNCTIONS

• merge.rspec() combines rspec objects in a single object

VISUAL MODEL

• Changed vismodel() output: von Kries correction is now an optional argument, output includes only Qi and fi
• vismodel() accepts a scale parameter (multiplies iluminant in order to make it in flux units)
• coldist() includes option for receptor noise calculation
• Updated sensitivity curves

MINOR FEATURES

• sensmodel() accepts user-defined ocular media transmission
• voloverlap() allows greater user control of plotting options
• voloverlap() includes Monte Carlo option for overlap calculation
• as.rspec() accepts “whichwl” argument for user-defined wavelength column selection
• as.rspec() includes “interp” argument; updated automatic search for wavelength column
• aggspec() aggregates spectra by multiple vectors (e.g. average spectra by species and sex using by=list(species,sex) )
• peakshape() gives plot titles, allows ask=TRUE and mfrow

BUG FIXES

• explorespec() “free” argument fixed
• summary.rspec() S5 variable fixed; segments now divided by B1 (brightness-independent measure of saturation)
• summary.rspec() checks for positive values when bmaxneg is caluclated, returns NA
• tcs() accepts “v” cone class
• aggspec() fixed matching of names
• procspec() works with rspec objects that include a single reflectance spectrum
• peakshape() minor fixes