We use **MOEADr** to optimize a simple 2-objective problem composed of the Sphere function and the Rastrigin function in \(X = \{x_1,x_2,\dots,x_D\} \in\mathbb{R}^D\).

For this example, we define the sphere and rastrigin function in \(\mathbb{R}\) as: \[ \text{sphere}(X) = \sum_{i=1}^D x_i^2\\ \text{rastrigin}(X) = \sum_{i=1}^D (x_i^2 - 10 \text{cos}(2\pi x_i) + 10) \] Their R implementation is as follows. Because both functions have the optimum at the zero, we apply a simple displacement on the input parameters to make the output of the example problem more interesting.

```
sphere <- function(X) {
X.shift <- X + seq_along(X)*0.1 # displace input parameters
sum(X.shift**2) }
rastringin <- function(X) {
X.shift <- X - seq_along(X)*0.1 # displace input parameters in the opposite direction
sum((X.shift)**2 - 10 * cos(2 * pi * X.shift) + 10) }
```

The **MOEADr** package requires the multi objective problem to be defined as a function that receives the entire solution set as a matrix, and return the objective values also as a matrix. For details see the Problem Definition vignette. We will achieve this requirement by wraping the sphere function and the rastrigin function as follows:

```
problem.sr <- function(X) {
t(apply(X, MARGIN = 1,
FUN = function(X) { c(sphere(X), rastringin(X)) }
))
}
```

Finally, we need to create a problem definition list that specifies the number of objectives, and the minimum and maximum parameter values for each dimension:

```
problem.1 <- list(name = "problem.sr", # function that executes the MOP
xmin = rep(-1,30), # minimum parameter value for each dimension
xmax = rep(1,30), # maximum parameter value for each dimension
m = 2) # number of objectives
```

To load the package and run the problem using the original MOEA/D variant, we use the following commands:

```
library(MOEADr)
results <- moead(problem = problem.1,
preset = preset_moead("original"),
showpars = list(show.iters = "none"),
seed = 42)
```

The *moead()* function requires a problem definition (discussed in the previous section) and an algorithm configuration (in this case, an algorithm preset, and optional changes to the preset), logging parameters, and a seed. The *preset_moead()* function can output a number of different presets based on combinations found on the literature. In this example, *preset_moead(“original”)* returns the original MOEA/D configuration, as proposed by Zhang and Li (2007)^{1}. You can get a list of available presets by running:

```
preset_moead()
#> name x description
#> 1 original | Original MOEA/D: Zhang and Li (2007), Sec. V-E, p.721-722
#> 2 original2 | Original MOEA/D, v2: Zhang and Li (2007), Sec. V-F, p.724
#> 3 moead.de | MOEA/D-DE: Li and Zhang (2009)
#>
#>
#> Use preset_moead("name") to generate a standard MOEAD composition
```

The *moead()* function returns a list object of class *moead*, containing the final solution set, objective values for each solution, and other information about the optimization process. The **MOEADr** package uses S3 to implement versions of *plot()* and *summary()* for this object.

*plot()* will show the pareto front for the objectives, as in the figure below. When the number of objectives is greater than 2, a parallel coordinates plot is also produced (see the next example). *summary()* displays information about the number of non-dominated and feasible solution points, the estimated ideal and nadir values (when available), and (optionally) the IDR and hypervolume yielded by the feasible, nondominated set.

```
summary(results)
#> Warning: reference point not provided:
#>
#> using the maximum in each dimension instead.
#> Summary of MOEA/D run
#> #====================================
#> Total function evaluations: 20100
#> Total iterations: 200
#> Population size: 100
#> Feasible points found: 100 (100% of total)
#> Nondominated points found: 100 (100% of total)
#> Estimated ideal point: 31.879 92.925
#> Estimated nadir point: 117.372 450.424
#> Estimated HV: 23972.73
#> Ref point used for HV: 117.3718 450.4242
#> #====================================
plot(results, suppress.pause = TRUE)
```

The **smoof** package^{2} provides generators for a large number of single and multi objective test functions. The **MOEADr** package provides a wrapper (function *make_vectorized_smoof()*) to easily convert **smoof** functions to the format required by the *moead()* function. The code snipped below generates a MOP with five objective functions from **smoof**, and the necessary problem definition for *moead()*.

```
library(smoof)
#> Loading required package: ParamHelpers
#> Loading required package: BBmisc
#> Loading required package: checkmate
DTLZ2 <- make_vectorized_smoof(prob.name = "DTLZ2",
dimensions = 20,
n.objectives = 5)
problem.dtlz2 <- list(name = "DTLZ2",
xmin = rep(0, 20),
xmax = rep(1, 20),
m = 5)
```

In this example we will also show how to modify an algorithm preset. Because of the higher number of objectives, we want to reduce the value of the parameter \(H\) in the decomposition component *SLD* used by the preset from 100 to 8:

```
results.dtlz <- moead(problem = problem.dtlz2,
preset = preset_moead("original"),
decomp = list(name = "SLD", H = 8),
showpars = list(show.iters = "dots"),
seed = 42)
#>
#> MOEA/D running: ....................
```

Notice on the figure below that **MOEADr** plots extra information when the number of objectives in a problem is greater than 2:

```
summary(results.dtlz)
#> Warning: reference point not provided:
#>
#> using the maximum in each dimension instead.
#> Summary of MOEA/D run
#> #====================================
#> Total function evaluations: 99495
#> Total iterations: 200
#> Population size: 495
#> Feasible points found: 495 (100% of total)
#> Nondominated points found: 242 (48.9% of total)
#> Estimated ideal point: 0 0 0 0 0
#> Estimated nadir point: 1.252 1.176 1.174 1.571 2.16
#> Estimated HV: 4.974365
#> Ref point used for HV: 1.252253 1.176129 1.174102 1.57124 2.160007
#> #====================================
plot(results.dtlz, suppress.pause = TRUE)
```

Note that for more complex MOPs, the preset values suggested by *preset_moead()* might not be effective. For example, the standard value of 100 for \(H\) in the *SLD* component is appropriate for 2 objectives, but exceeds the available memory for \(m > 3\). Therefore, we strongly recommend that the user explore the meta-parameter space. The next case study shows one way to perform this task semi-automatically.