The package rdefra allows to retrieve air pollution data from the Air Information Resource (UK-AIR, https://uk-air.defra.gov.uk/) of the Department for Environment, Food and Rural Affairs in the United Kingdom. UK-AIR does not provide a public API for programmatic access to data, therefore this package scrapes the HTML pages to get relevant information.
This package follows a logic similar to other packages such as waterData and rnrfa: sites are first identified through a catalogue, data are imported via the station identification number, then data are visualised and/or used in analyses. The metadata related to the monitoring stations are accessible through the function
ukair_catalogue(), missing stations' coordinates can be obtained using the function
ukair_get_coordinates(), and time series data related to different pollutants can be obtained using the function
The package is designed to collect data efficiently. It allows to download multiple years of data for a single station with one line of code and, if used with the parallel package, allows the acquisition of data from hundreds of sites in only few minutes.
The rdefra package depends on two things:
The Geospatial Data Abstraction Library (gdal).
Some additional CRAN packages. Check for missing dependencies and install them using the commands below:
packs <- c("httr", "xml2", "lubridate", "tibble", "dplyr", "sp", "devtools", "leaflet", "zoo", "testthat", "knitr", "Rmarkdown") new.packages <- packs[!(packs %in% installed.packages()[,"Package"])] if(length(new.packages)) install.packages(new.packages)
Get the released version from CRAN:
Or the development version from github using devtools:
Load the rdefra package:
The package logic assumes that users access the UK-AIR database in two steps:
DEFRA monitoring stations can be downloaded and filtered using the function
ukair_catalogue() with no input parameters, as in the example below.
# Get full catalogue stations_raw <- ukair_catalogue()
The same function, can be used to filter the catalogue using the following input parameters:
site_nameIDs of specific site (UK.AIR.ID). By default this is left blank to get info on all the available sites.
pollutantThis is an integer between 1 and 10. Default is 9999, which means all the pollutants.
group_idThis is the identification number of a group of stations. Default is 9999 which means all available networks.
closedThis is set to TRUE to include closed stations, FALSE otherwise.
country_idThis is the identification number of the country, it can be an integer between 1 and 6. Default is 9999, which means all the countries.
region_idThis is the identification number of the region. 1 = Aberdeen City, etc. (for the full list see https://uk-air.defra.gov.uk/). Default is 9999, which means all the local authorities.
stations_EnglandOzone <- ukair_catalogue(pollutant = 1, country_id = 1)
The example above shows how to retrieve the 108 stations in England in which ozone is measured.
Locating a station is extremely important to be able to carry out any spatial analysis. If coordinates are missing, for some stations in the catalogue, it might be possible to retrieve Easting and Northing (coordinates in the British National Grid) from DEFRA's web pages. Get E and N, transform them to latitude and longitude and populate the missing coordinates using the code below.
# Scrape DEFRA website to get Easting/Northing stations <- ukair_get_coordinates(stations_raw)
Pollution data started to be collected in 1972 and consists of hourly concentration of various species (in μg/m3), such as ozone (O3), particulate matters (PM2.5 and PM10), nitrogen dioxide (NO2), sulphur dioxide (SO2), and so on.
The ID under which they are available differs from the UK.AIR.ID. The catalogue does not contain this additional station ID (called SiteID hereafter) but DEFRA's web pages contain references to both the UK.AIR.ID and the SiteID. The function below uses as input the UK.AIR.ID and outputs the SiteID, if available.
stations$SiteID <- ukair_get_site_id(stations$UK.AIR.ID)
The time series for a given station can be retrieved in one line of code:
# Get 1 year of hourly ozone data from London Marylebone Road monitoring station df <- ukair_get_hourly_data("MY1", years=2015) # Aggregate to daily means and plot library("zoo") my1 <- zoo(x = df$Ozone, order.by = as.POSIXlt(df$datetime))
par(mai = c(0.5, 1, 0, 0)) plot(aggregate(my1, as.Date(as.POSIXlt(df$datetime)), mean), main = "", xlab = "", ylab = expression(paste("Ozone concentration [", mu, "g/", m^3, "]")))
Highest concentrations seem to happen in late spring and at the beginning of summer. In order to check whether this happens every year, we can download multiple years of data and then compare them.
# Get 15 years of hourly ozone data from the same monitoring station library("ggplot2") library("dplyr") library("lubridate") df <- ukair_get_hourly_data("MY1", years = 2000:2015) df <- mutate(df, year = year(datetime), month = month(datetime), year_month = strftime(datetime, "%Y-%m")) df %>% group_by(month, year_month) %>% summarize(ozone = mean(Ozone, na.rm=TRUE)) %>% ggplot() + geom_boxplot(aes(x = as.factor(month), y = ozone, group = month), outlier.shape = NA) + xlab("Month of the year") + ylab(expression(paste("Ozone concentration (", mu, "g/",m^3,")")))
The above box plots show that the highest concentrations usually occurr during April/May and that these vary year-by-year.
For convenience, a cached version of the catalogue (last updated in August 2016) is included in the package and can be loaded using the following command:
data("stations") stations #> # A tibble: 6,569 x 17 #> UK.AIR.ID EU.Site.ID EMEP.Site.ID Site.Name Environment.Type Zone #> <chr> <chr> <chr> <chr> <chr> <chr> #> 1 UKA15910 <NA> <NA> " SH15, … <NA> Sout… #> 2 UKA15956 <NA> <NA> " SH15, … <NA> Sout… #> 3 UKA16663 <NA> <NA> " SH15, … <NA> Sout… #> 4 UKA16097 <NA> <NA> 10 High … <NA> Sout… #> 5 UKA12536 <NA> <NA> ABBOTS L… <NA> Grea… #> 6 UKA12949 <NA> <NA> ABERBARG… <NA> Sout… #> 7 UKA12399 <NA> <NA> ABERCARN… <NA> Sout… #> 8 UKA13340 <NA> <NA> ABERDARE… <NA> Sout… #> 9 UKA13341 <NA> <NA> ABERDARE… <NA> Sout… #> 10 UKA15369 <NA> <NA> ABERDARE… <NA> Sout… #> # … with 6,559 more rows, and 11 more variables: Start.Date <dttm>, #> # End.Date <dttm>, Latitude <dbl>, Longitude <dbl>, Altitude..m. <dbl>, #> # Networks <chr>, AURN.Pollutants.Measured <chr>, #> # Site.Description <chr>, Easting <dbl>, Northing <dbl>, SiteID <chr>
The cached catalogue contains all the available site IDs and coordinates and can be quickly used as lookup table to find out the correspondence between the UK.AIR.ID and SiteID, as well as to investigate station characteristics.
In the raw catalogue, 3840 stations contain valid coordinates. After scraping DEFRA's web pages, the number of stations with valid coordinates rises to 6567. In the figure below, blue circles show all the stations with valid coordinates, while red circles show stations with available hourly data.
stations_with_Hdata <- which(!is.na(stations$SiteID)) library("leaflet") leaflet(data = stations) %>% addTiles() %>% addCircleMarkers(lng = ~Longitude[stations_with_Hdata], lat = ~Latitude[stations_with_Hdata], radius = 0.5, color="red", popup = ~SiteID[stations_with_Hdata]) %>% addCircleMarkers(lng = ~Longitude, lat = ~Latitude, popup = ~SiteID, radius = 1, color="blue", fill = FALSE)
Below are two plots showing the spatial distribution of the monitoring stations. These are concentrated largely in urban areas and mostly estimate the background level of concentration of pollutants.
# Zone dotchart(as.matrix(table(stations$Zone))[,1])
# Environment.Type dotchart(as.matrix(table(stations$Environment.Type[stations$Environment.Type != "Unknown Unknown"]))[,1])
The acquisition of data from hundreds of sites takes only few minutes:
library("parallel") # Use detectCores() to find out many cores are available on your machine cl <- makeCluster(getOption("cl.cores", detectCores())) system.time(myList <- parLapply(cl, stations$SiteID[stations_with_Hdata], ukair_get_hourly_data, years=1999:2016)) stopCluster(cl) df <- bind_rows(myList)