# Usage of R package LTRCtrees

## Vignette Info

The LTRCtrees package is designed to fit survival trees for left-truncated and right censored (LTRC) data as described in Fu and Simonoff (2017a)[1], and interval-censored survival data as described in Fu and Simonoff (2017b)[2]. For right censored data, the tree algorithms in rpart[3] and partykit[4], respectively, can be used to fit a survival tree. The LTRCtrees package extends the survival tree algorithms in these two packages to fit trees for LTRC data, as well as interval-censored survival data. Since the package uses the fitting functions in rpart and partykit, these packages will be installed if they have not already been installed on the user’s machine, but they are not loaded into the session when the LTRCtrees package is loaded. In addition to fitting trees to LTRC data, a major benefit of these extensions is that they can be used to fit survival trees for data with time-varying covariates.

This document gives several examples of how to use the LTRC trees and ICtree (interval-censored tree) implemented in the LTRCtrees package.

## Example of fitting survival trees for LTRC data

### The assay of serum free light chain data example

The assay of serum free light chain data for 7874 subjects in the R package survival[5] is used as a data example to show how to fit survival trees for LTRC data. The original data were obtained from the residents of Olmsted County aged 50 or greater, and therefore the data are left-truncated at age 50. The original analysis of this data set was based on the Cox model with age as a covariate and time after enrollment in the study as response. However, in a mortality study such as this one, since greater age is almost always associated with higher risk of death, it is not that meaningful (or surprising) to have age as a (significant) covariate. Also, it is often the case that the real response of interest should be the subject’s life length, not the time from enrollment in the study to death/censoring.

In this example, we use age as a left-truncation point and death/censored time as the event time.

The key here is to have a (start, stop, event) triplet in the data, where start is the left-truncation time, stop is the right censored/event time and event is the event indicator, where 1 means death and 0 means censored. In our case, the triplet is (age, End, death).

Here we set up a training set and a test set to illustrate predictions using the fitted trees.

Note that the terminal node of the LTRCART tree (left panel) displays the relative risk on that node (relative to an estimated baseline hazard), while the terminal node of the LTRCIT tree (right panel) displays the fitted Kaplan-Meier curve for the observations in that node. One can also plot Kaplan-Meier curves on terminal nodes of the LTRCART tree by converting it to party object.

Since the class of an LTRCIT object is party, the prediction method on an LTRCIT object is the same as those for any trees of class party using the partykit package.

##     1057     1058     1059     1060     1061     1062
## 90.47123 90.47123 90.47123 90.47123 90.47123 83.41644
## $1057 ## Call: survfit(formula = y ~ 1, weights = w, subset = w > 0) ## ## records n.max n.start events median 0.95LCL 0.95UCL ## 248.0 144.0 36.0 189.0 90.5 88.4 91.4 ## ##$1058
## Call: survfit(formula = y ~ 1, weights = w, subset = w > 0)
##
## records   n.max n.start  events  median 0.95LCL 0.95UCL
##   248.0   144.0    36.0   189.0    90.5    88.4    91.4

The prediction function on a survival rpart object can only predict the relative risk, so we can only predict the relative risk on an LTRCART object.

##      1057      1058      1059      1060      1061      1062
## 0.7212083 0.7212083 0.7212083 0.7212083 0.7212083 1.5257057

In order to predict the median survival time and Kaplan-Meier curves based on an LTRCART object, one can use the Pred.rpart function available in the LTRCtrees package.

## [[1]]
## Call: survfit(formula = Formula, data = subset)
##
## records   n.max n.start  events  median 0.95LCL 0.95UCL
##   248.0   144.0    36.0   189.0    90.5    88.4    91.4
##
## [[2]]
## Call: survfit(formula = Formula, data = subset)
##
## records   n.max n.start  events  median 0.95LCL 0.95UCL
##   248.0   144.0    36.0   189.0    90.5    88.4    91.4
## [1] 90.5 90.5 90.5 90.5 90.5 83.8

Note that in order to use the Pred.rpart function one needs to pass both the Training and Test sets into the function. If the formula passed to Pred.rpart has the form Surv(time1, time2, event), then the function recognizes this as LTRC data and LTRCART is called internally; if the formula has the form Surv(time, event), then the function recognizes this as ordinary right censored data, and the rpart function in the rpart package is called internally.

## Examples of fitting survival trees with time-varying covariates

To fit time-varying covariates survival trees using LTRCART or LTRCIT, data need to be prepared/transformed into the so-called Andersen-Gill style. This is exactly the same data format needed to fit the Cox model with time-varying covariates.

Patient.ID Sex Blood.pressure Start End Death
1 F 100 0 10 0
1 F 89 10 20 0
1 F 120 20 27 1
2 M 110 0 10 0
2 M 105 10 19 0

This table gives an example of the form of Andersen-Gill style data. Information for two patients is presented in this table, with Sex being a time-independent covariate and Blood pressure being a time-varying covariate. For the first patient (patient.ID=1), the event-death is observed at time 27, while the 3 measurements of Sex and blood pressure are recorded at the beginning and time 10 and 20 respectively. Information for the second patient has a similar interpretation except he is censored at time 19.

Note that each row represents a time interval, where within each interval all covariates are assumed to have constant values. The first row means the first patient is a female with blood pressure equal to 100 during the interval (0,10]. Of course, blood pressure is unlikely to keep at a fixed level during this time interval (since it is time-varying), but in practice a patient’s blood pressure is measured only at the time he/she visits the clinic, so it is common practice to treat it as constant between the two visits.

Note that as a result each row has the form of LTRC data – left-truncated at Start and right-censored or experience event at End, with Death being the event indicator.

### The Mayo Clinic Primary Biliary Cirrhosis Data example

The pbcseq dataset in the survival package is used as an example to illustrate fitting survival trees with time-varying covariates. These data were obtained from 312 patients with primary biliary cirrhosis (PBC) enrolled in a double-blind, placebo-controlled, randomized trial conducted between January, 1974 and May, 1984 at the Mayo Clinic to evaluate the use of D-penicillamine for treating PBC. A comprehensive clinical and laboratory database was established on each patient. Follow-up was extended to April, 1988, by which time 140 of the patients had died and 29 had undergone orthotopic liver transplantation. These patients generated 1,945 patient visits that enable us to study the change in the prognostic variables of PBC.

## Call:
## coxph(formula = Surv(time1, time2, event) ~ age + sex + log(bili),
##     data = pbcseq)
##
##               coef exp(coef) se(coef)      z        p
## age       0.068285  1.070670 0.008624  7.918 2.42e-15
## sexf      0.182856  1.200641 0.234190  0.781    0.435
## log(bili) 1.465486  4.329646 0.094157 15.564  < 2e-16
##
## Likelihood ratio test=352.8  on 3 df, p=< 2.2e-16
## n= 1945, number of events= 140

Note that both survival trees fitted using LTRCART and LTRCIT, respectively, identify age and log(bili) as risk factors, which is consistent with the Cox model result.

### The Stanford Heart Transplant data example

In the previous example, the pbcseq data are in the long format – each row represents a start-stop-event triplet, which contains the information in the time interval (start, stop]. Note that all covariates have constant values inside each such interval, while each subject could have multiple rows (multiple intervals) to represent the time-varying covariates effect, i.e. different rows (intervals) of the same subject contain different covariates’ value. The long format data can be directly used to fit survival trees with time-varying covariates using either LTRCART or LTRCIT.

It is common to have time-varying covariates survival data that is in wide format – each row contains all of the information of one subject. To use the tree algorithms in LTRCtrees, we first need to transform the wide format into the long format. The tmerge function in the survival package can be used to serve this purpose.

## Call:
## coxph(formula = Surv(tstart, tstop, death) ~ age + surgery, data = sdata)
##
##             coef exp(coef) se(coef)     z      p
## age      0.03068   1.03115  0.01364  2.25 0.0245
## surgery -0.77284   0.46170  0.35953 -2.15 0.0316
##
## Likelihood ratio test=10.72  on 2 df, p=0.00471
## n= 170, number of events= 75

## Example of fitting survival trees for interval-censored data

### The bcos data example

## Depends on Icens package available on bioconductor.
## To install use for example:
## install.packages('BiocManager')
## BiocManager::install('Icens')
## ans < 0 || ans > 1. t_diff = 12.000000, pStep = 0.055206, intLen = 12.000000, ind = 19, k = 20

## References

[1] Fu, W. and Simonoff, J.S. (2017a). Survival trees for left-truncated and right-censored data, with application to time-varying covariate data. Biostatistics 18 (2), 352-369

[2] Fu, W. and Simonoff, J.S. (2017b). Survival trees for Interval Censored Survival data. Statistics in medicine 36 (30), 4831-4842

[3] Therneau, T., Atkinson, B., Ripley, B. and Ripley, M.B., (2015). rpart: Recursive Partitioning and Regression Trees.

[4] Hothorn, T. and Zeileis, A., (2015). partykit: A Modular Toolkit for Recursive Partytioning in R.

[5] Therneau, T., (2015). survival: A Package for Survival Analysis in S. version 2.38.

[6] Milborrow, S., (2011). rpart.plot: Plot ‘rpart’ models: An Enhanced Version of ‘plot.rpart’.